- kVA and kW
- kW is the real power a generator delivers to the load. kVA is apparent power. kW equals kVA multiplied by the power factor, so a 12 kVA unit at power factor 1.0 delivers 12 kW, and at 0.8 delivers 9.6 kW.
- Power factor
- The ratio of real power (kW) to apparent power (kVA), set by the load. Motors and older equipment often run near 0.8.
- Prime rating
- The power a generator can supply continuously for unlimited hours at variable load.
- Standby rating
- The power a generator can supply for a limited time during a grid outage. It is higher than the prime rating.
- Load factor
- Average output as a share of rated output. A 12 kW unit averaging 6 kW runs at 50% load.
- Air bearing
- A bearing in which the shaft rides on a thin film of air, so no oil is needed.
- Recuperator
- A heat exchanger that preheats combustion air with exhaust heat.
- Genset
- Short for generating set: an engine or turbine coupled to an alternator.
- HVO
- Hydrotreated vegetable oil, a renewable diesel made from waste fats and oils.
- FAME biodiesel
- Fatty acid methyl ester, the most common biodiesel.
- Kerosene
- A light distillate fuel used for heating, lighting and jet fuel.
- Paraffin
- The common name for kerosene in the UK and South Africa.
- ISO 8528
- The international standard for rating, performance and testing of generating sets driven by reciprocating engines. Generator ratings such as prime and standby are defined under it.
- EU Stage V
- The European emission limits for non-road engines. Each Bladon microturbine genset exceeds EU Stage V equivalent.
- Derating
- Reducing a generator's rated output at high temperature or altitude.
- Hybrid power system
- A site that combines solar or wind, batteries and a generator.
- Remote monitoring
- Reading a generator's status, alarms and run hours over a mobile or satellite link without visiting the site.