Updated
A microturbine genset is a small turbine coupled to an alternator, generating electricity on site with 1 moving part spinning on air bearings. Bladon builds two: the MTG12 at 12 kVA / 12 kW and the MTP40 at 40 kVA / 32 kW prime, 44 kVA standby. Read the full explainer.
A diesel generator burns fuel in pistons that need oil changes every 250 to 500 run hours, while a Bladon microturbine burns it continuously in a turbine with 1 moving part and no engine oil. That gives you one service visit per year, a 45,000 hour design life against 15,000 to 25,000 hour for diesel, and a unit three times quieter than a diesel generator. See the full comparison.
The shaft rides on air bearings, a thin film of air, so there is nothing to lubricate. No oil means no oil changes, no waste oil to dispose of and no oil to foul at low load. How the technology works.
The whole machine turns on a single rotating assembly on air bearings, with no reciprocating motion, so there is no engine vibration transmitted to the mounts or the structure it sits on. Fewer parts to wear means fewer field failures and one service visit per year. Explore the technology.
Two sizes: the MTG12, a 12 kVA multi-fuel microturbine genset (12 kVA / 12 kW prime and standby), and the MTP40, a 40 kVA three-phase multi-fuel microturbine genset (40 kVA / 32 kW prime, 44 kVA / 35.2 kW standby). The MTG12 is in production: available now and the MTP40 is available for pre-order. Compare the range.
Up to 90% service cost saving and a 30 to 50% fuel cost saving, against a like-for-like diesel genset. The saving depends on the diesel-to-kerosene price gap in your market, and we will model it for your site. See worked examples by region.
Mostly from fewer visits: one service visit per year against once a month or 300 run hours for a diesel. The saving comes from fuel price and fuel loss. Multi-fuel capability lets a site run cheaper fuel such as kerosene, so the fuel bill falls, and far less of it is lost to theft. See where the gap comes from.
At 75% load the MTP40 uses 7.47 litres an hour, against 8.0 to 8.4 litres for comparable 40 kVA diesel gensets: up to 11% less fuel. Sized to your site's load, a Bladon microturbine can burn less fuel than an oversized diesel genset running lightly loaded, which wastes fuel and fouls at low load. Model your own fuel use.
It depends on your fuel price, fuel lost to theft, the cost of each visit and the capital cost of the units. Enter those in the TCO calculator and it works out your payback period, or start from our running cost examples.
We quote every project rather than publish a list price, because the cost depends on the unit (MTG12 or MTP40), the quantity, site options such as Cold Pack, Hot Pack or the Silent Pack, and delivery and commissioning. A microturbine costs more up front than a comparable diesel genset and earns it back through fewer visits and cheaper fuel. Ask sales for a quote or model payback in the TCO calculator.
Diesel, kerosene, paraffin, HVO, FAME biofuel, and blends of these in any ratio. Both units run all of them today. See every fuel.
Yes. You can switch fuel between fills, or mix fuels in any ratio in the same tank, with no hardware change, and performance, service interval and design life are unchanged. Fuel flexibility.
Rules vary by country, because many countries tax or restrict rebated heating fuels. In the UK, HMRC Excise Notice 75 sets out where rebated fuels such as kerosene may be used, so check with your fuel supplier or adviser before you switch. Read our kerosene generator guide.
Yes. HVO and FAME biofuel run today with no hardware change, on their own or blended with diesel or kerosene. Fuels running today.
Biogas, LPG, natural gas, flare gas, hydrogen, ethanol and bioethanol are in development, and we have not set a release date. The combustor is a modular, future-proofed sub-assembly. Changing the fuel a microturbine burns is a combustor problem, so the gaseous-fuel roadmap is an engineering programme with a defined route to market. Fuel roadmap.
One service visit per year, regardless of run hours. A diesel genset needs attention every 250 to 500 run hours. Service and support.
Air filter and fuel filter replacement at the annual service visit, plus a full check of the unit, and it takes under an hour on site. There is no oil to change. What the service covers.
New units carry a warranty of 24 months or 8,760 run hours, parts and labour, whichever comes first, with extended warranty optional. Ryse Energy and Bladon service and supply spares for every Bladon unit, including units installed before the acquisition. Service and warranty.
45,000 hours, against 15,000 to 25,000 hours for a comparable diesel genset. Running around the clock, that is more than five years of continuous duty from one unit. Microturbine vs diesel.
Yes. Every unit has a DSE 7320 controller and a DSE 890 remote module with 4G, giving you 24/7 remote monitoring of status, alarms and run hours, so you send an engineer only when it matters. Service and support.
Yes. The MTG12 operates across -20°C to +50°C and the MTP40 across -20°C to +45°C, subject to de-rating for altitude and temperature above ISO 8528 reference conditions. Output de-rates for altitude and for temperature above ISO 8528 standard reference conditions. Cold Pack and Hot Pack kits are available for the ends of the range. At a desert oil and gas site, an MTG12 ran over 9,200 hours on three site visits: read the case study.
Three times quieter than a diesel generator: the MTG12 runs at 60 dB LPA at 7 m standard, or under 50 dB LPA at 7 m with the Super Quiet Pack, and the MTP40 has a design target of 60 dB LPA at 10 m, or 50 dB LPA with the Silent Pack, not yet verified by test. Both figures are sound pressure in free-field conditions. The MTP40 figures are a design target, not yet verified by test. See the specifications.
Yes. With one service visit per year and 24/7 remote monitoring, it is built for sites nobody visits. Oil and gas sites.
Yes. In Papua New Guinea, Bladon microturbines run alongside wind, solar and storage on 70 hybrid tower sites, delivering up to 90% renewable power with the microturbine as the firm generator. Read the case study.
The standard microturbine is not certified for hazardous-area use. Contact sales early if your site requires ATEX or equivalent certification, as bespoke arrangements may be possible depending on programme size and timeline. Contact sales.
Bladon Technologies Limited (company number 16052329), a Ryse Energy company, based in Warwick, UK. Bladon Micro Turbine is our product brand. About us.
In Warwick, UK, at our site in Warwickshire. About us.
Contact us and we will tell you who covers your market, or how we can supply you directly. If you want to sell and support Bladon gensets yourself, become a distributor.