Bladon Micro Turbine: home

How Often Does a Diesel Generator Need Servicing?

Bladon Micro Turbine engineering team

Updated

Engineer servicing a generator at a remote site

A diesel generator typically needs an oil and filter service every 250 to 500 run hours, depending on the engine and its manufacturer. A generator running around the clock runs 8,760 hours a year, so it needs roughly 18 to 35 services a year: a visit every two to three weeks.

What a diesel service involves

  • Engine oil and oil filter change
  • Fuel and air filter replacement
  • Coolant, belt and battery checks
  • Periodic injector and valve work at longer intervals

Why visits cost more at remote sites

The service itself may take a couple of hours. Getting there can take a day. At remote telecom towers, wellheads and island sites, travel and access often cost more than the parts and labour.

How often a Bladon microturbine needs servicing

Once a year, regardless of run hours. There is no engine oil to change, because the microturbine runs on air bearings. The air and fuel filters are replaced at that one visit, which takes under an hour on site.

The evidence

At a remote desert oil and gas site, a Bladon MTG12 ran 9,267 hours with three site visits. A comparable diesel would have needed a filter change every 300 hours. Read the oil and gas case study.

Enter your own visit count and cost per visit in the TCO calculator to see what one visit a year is worth to you.

This article is part of the Bladon archive and reflects the position at the date of publication.